Tungsten Carbide Oval Die 4 x 2mm Wire and Tube Drawing DrawPlate 4x2 A-1 ITALY

Description

TUNGSTEN CARBIDE DRAWING DIE OVAL SHAPE
OVAL SHAPE - SIZE 4mm x 2mm
This is a Premium Quality Tungsten Carbide Wire Drawing Die.  The Tungsten Carbide Drawing Die is the inset in the steel. It is riveted and secured in solid steel casing.
A-1 Quality Made in ITALY
The dies can be used with a draw bench, wire drawing machine, even in a jig held by a vise.  A portion of the tip/front end of the wire or tube should always be sharpened or manipulated to a smaller size to fit the hole and be enough to be held by drawing tong in order to pull and reduce.
During the drawing process a lubricant should be used – Wax, Soluble Oil…
Always anneal wire to be drawn and reduced in diameter prior and periodically during the drawing operation.
The tungsten carbide give consistent and smooth finish, they last as long as it is used properly.
Never try to reduce use down to much at one time, gradual reduction is best and annealing is important. The proper use is important for the die to last and no get damaged.
SPECIFICATIONS:
JETS Product # 0403-544020
-
Wire Die Shape and Size:
Oval
-
4mm
x
2mm
/
5/32"
x
5/64"
/
0.1575"
x
0.0785"
-
Die Casing Size:
Diameter: 42.9mm
x
Thickness: 21.9mm
-
Carbide Insert:
Diameter: 13.5mm
x
Thickness: 18mm
-
Weight:
8.3oz.
-
235gr
SHIPPING: USPS Mail
Please visit
JETSTOOLS
ebay store to see many other sizes and shapes of Drawing Dies and Draw Plates for Metal working, along with a full line of Hand Tools and a wide selection of various Supplies for Jewelry Making.
JETS Inc
.
E10 CKSP 818 M